EMC TA | ||
---|---|---|
Data Sheet Information Compiled by: JEAN-DENIS BACHAND | ||
New: 6 May 2006 | Artwork by: Jean-Denis Bachand | |
- | ||
Engine Builder: Winton | Engine: 201-A 16 cylinder | |
Bore & Stroke | 8" X 10" | |
RPM (Maximum / Minimum) | 750 / 275 | |
Main Generator: GE - 542 (2) | Horsepower: 1000 | |
Gear Ratio: 62:15 | Speed: 65 mph | |
Trucks: 4-Wheel | Configuration: B-B | |
Traction Motor Blowers: Mechanical Drive (1) | Model: GM | |
Weight: 230,000 lbs | Traction Motors: GE - 726C (four) | |
Tractive Effort (starting) 56,500 lbs @25% | Tractive Effort (continuous): 31,000 lbs @ 11.0 mph | |
Multiple Unit Capability: No | Dynamic Braking: No | |
Auxilary Generator: Delco A8102 | Alternator: | |
Air Brake: Westinghouse | Model: 6BL | |
Compressor: Gardner Denver | Model: WBO | |
Quantity Built: 6 | Dates: 6/1937 to 8/1937 | |
- | - | |
Exterior Dimensions | TA | |
Total Length | 60'-10" | |
Wheel Diameter | 40" | |
Truck Wheel Base | 9'-00" | |
Height to Top Engine Hood | 13'-11" | |
Height to Top Cab | 14'-11" | |
Cab Width | 10'-07" | |
Engine Hood Width | 10'-00" | |
Center Bolster | 34'-00" | |
Center Front Truck to Front Pilot | 6'-11" | |
Center Rear Truck to Rear Pilot | 6'-08" | |
Distance between Truck Centers | 53'-00" | |
Minimum Turning Radious | 57 degrees | |
- | - | |
Fuel Oil: 1000 | Lubricating Oil: 185 | |
Engine Cooling Water: 200 | Sand Capacity: 30 cu. ft. | |
Options: Vapor Clarkson Boiler: 800 lbs/hr | ||
- | ||
- | Artwork by: Jean-Denis Bachand | |
- | ||
Reference Sources:
|